DigiTrak Eclipse - Accessories | Universal HDD™ - Custom Horizontal Directional Drills and HDD Equipment

Cable-Ready Remote Display

The Cable-Ready Remote Display is required when using either the Eclipse® cable or SST® transmitters.

MFD®

The Multi-Function Display can accept and display telemetry signals from 5* different DCI manufactured receivers: Eclipse™, Eclipse®, LT2™, Mark III, and Mark V. The MFD® unit can also be used with the Eclipse® TensiTrak® Pullback and Pressure Monitoring system.

* to receive telemetry signal from the LT2™ and Eclipse™ receivers requires an update to Gen 2.

Transmitters

There are a variety of transmitters available for use with our Eclipse series locators including battery and cable units. Go to the transmitters page for more information.

Battery Charger

The DigiTrak Battery Charger re-charges your NiCad batteries with a quick charge feature.

*All illustrations and specifications contained on this web site are based on the latest product information available at the time of design. Universal HDD™ reserves the right to make changes at any time, without notice, in materials, equipment, components, specifications and models. Some drills pictured may contain non-U.S. equipment. Some models may be shown with optional equipment. While Universal HDD™ makes diligent efforts to provide accurate information on this web site, there is no guarantee or warranty of accuracy. This web site shall not be used or relied upon as substitute for information that is available from your Universal HDD™ center. Further information can be obtained from your authorized Universal HDD™ dealers.