Accessories

DigiTrak LT

Remote Display

The Remote Display lets you see drilling information — depth, pitch, roll, temperature and battery status for the transmitter — at the drill.

DigiTrak LT

MFD®

The Multi-Function Display can accept and display telemetry signals from 5* different DCI manufactured receivers: LT™, LT®, LT2™, LT, and LT. The MFD® unit can also be used with the LT® TensiTrak® Pullback and Pressure Monitoring system.

* to receive telemetry signal from the LT2™ and LT™ receivers requires an update to Gen 2.

DigiTrak LT

Transmitters

There are two transmitters for the LT Locating System. A short-range transmitter suited for the new, smaller-diameter “mini” drill rig housings, as well as an adapter for the short-range transmitter to fit into standard housings. The standard-range transmitter is offered for larger rigs or longer, deeper shots. The LT Locating System is compatible with DCI’s DucTrak™ series of transmitters (12kHz only), which are used for tracking existing non-metallic ducts. Go to the transmitters page for more information.

DigiTrak LT

Battery Charger

The DigiTrak Battery Charger re-charges your NiCad batteries with a quick charge feature.

*All illustrations and specifications contained on this web site are based on the latest product information available at the time of design. Universal HDD™ reserves the right to make changes at any time, without notice, in materials, equipment, components, specifications and models. Some drills pictured may contain non-U.S. equipment. Some models may be shown with optional equipment. While Universal HDD™ makes diligent efforts to provide accurate information on this web site, there is no guarantee or warranty of accuracy. This web site shall not be used or relied upon as substitute for information that is available from your Universal HDD™ center. Further information can be obtained from your authorized Universal HDD™ dealers.