English language Portuguese language
DigiTrak SE

DigiTrak SE - Overview

The DigiTrak® SE™ Directional Drilling Locating System is compatible* with existing DigiTrak® Mark Series and multi-function remote displays. It provides the latest 3D antenna technology and intuitive picture-driven menus in a sleek affordable package.

Left/right remote steering and off-track locating are available when walkover tracking is not possible. Roll offset is available when the 12 o’clock position of the drill head cannot be indexed to the transmitter.

An update meter on the receiver shows the data transfer rate, making it easy to see when you are in an area of interference or reaching the range limit of the transmitter.

The ST transmitter included with the SE™ system has a depth range up to 50 ft (15.2 m). It can be powered with two alkaline batteries or one DigiTra® SuperCell™ battery. The transmitter has the same dimensions as other DigiTrak® transmitters, so tooling adjustments are not necessary for current DigiTrak® users.

*All illustrations and specifications contained on this web site are based on the latest product information available at the time of design. Universal HDD™ reserves the right to make changes at any time, without notice, in materials, equipment, components, specifications and models. Some drills pictured may contain non-U.S. equipment. Some models may be shown with optional equipment. While Universal HDD™ makes diligent efforts to provide accurate information on this web site, there is no guarantee or warranty of accuracy. This web site shall not be used or relied upon as substitute for information that is available from your Universal HDD™ center. Further information can be obtained from your authorized Universal HDD™ dealers.