DigiTrak SE - Features

DigiTrak SE - Features

  • Works with your existing DigiTrak® Mark Series or Multi-Function Remote Display
  • The award-winningF2™ target-in-the-box® technology
  • 3D antenna with 3D depth view
  • Intuitive picture-driven menus
  • Full one-year warranty on the receiver with support into the future

Specification for DigiTrak SE

Model Number:
SER
Frequency:
12 kHz
Power Source:
NiMH battery pack
Battery Life:
5–7 hr (approx.)
Battery Charger:
100–240 V AC, 50/60 Hz
Functions
Menu driven
Controls
Trigger switch
Graphic Display:
LCD
Audio output:
Beeper
Telemet. Range:
1000 ft (305 m)**
Telemet. Chan.:
4 channels
Accuracy:
± 5% absolute
Height:
11 in. (27.94 cm)
Width:
5.5 inch (13.97 cm)
Length:
15 inch (38.1 cm)
Weight:
7.7 lb (3.49 kg)
*All illustrations and specifications contained on this web site are based on the latest product information available at the time of design. Universal HDD™ reserves the right to make changes at any time, without notice, in materials, equipment, components, specifications and models. Some drills pictured may contain non-U.S. equipment. Some models may be shown with optional equipment. While Universal HDD™ makes diligent efforts to provide accurate information on this web site, there is no guarantee or warranty of accuracy. This web site shall not be used or relied upon as substitute for information that is available from your Universal HDD™ center. Further information can be obtained from your authorized Universal HDD™ dealers.