"... power and size is what impresses me most! Our first bore with the UNI-160x240 was a 14” HDPE discharge pipe. We bored our pilot hole to a diameter of 8” then direct pulled a 28” cutter reamer with a 28” packing reamer connected to our pipe. The 300 GPM Kerr pump worked flawlessly and the pull back power with the rotation torque of the Hagglunds Vane Pump Rotation Motor…we pulled the pipe back with confidence!"

"... our second bore with the UNI-160 was a two pipe project of 8” and 6” steel pipe 3200 feet long. This job site required a very powerful machine with the smallest foot print available. The UNI-160 proved itself once again! We punched out a 10” pilot hole and connected our 28” UNI-Fly Cutter and the 28” UNI-Packer to the pipe bundle and pulled it back effortlessly, This UNIVERSAL UNI-160 is definitely the machine for the job ...”

Joe Spoloric

President/Owner

RJS Utility

*All illustrations and specifications contained on this web site are based on the latest product information available at the time of design. Universal HDD™ reserves the right to make changes at any time, without notice, in materials, equipment, components, specifications and models. Some drills pictured may contain non-U.S. equipment. Some models may be shown with optional equipment. While Universal HDD™ makes diligent efforts to provide accurate information on this web site, there is no guarantee or warranty of accuracy. This web site shall not be used or relied upon as substitute for information that is available from your Universal HDD™ center. Further information can be obtained from your authorized Universal HDD™ dealers.